BMPJV - FIBERGLASS REINFORCED FILLER, 656

  • MSDS: BMPJV
  • Manufacturer: FIBRE GLASS EVERCOAT CO INC
  • Product Name: FIBERGLASS REINFORCED FILLER, 656
  • National Stock Number: 8040-00N025290
Product Identification

Product ID:FIBERGLASS REINFORCED FILLER, 656
MSDS Date:08/09/1988
FSC:8040
NIIN:00N025290
MSDS Number: BMPJV

Responsible Party
FIBRE GLASS-EVERCOAT CO INC
6600 CORNELL RD
CINCINNATI, OH 45242
US

Emergency Phone: 800-543-4530

Info Phone: 513-489-7600

Cage: 18731

Contractor
FIBRE GLASS-EVERCOAT CO INC
CINCINNATI, OH 45242 US

Telephone: 513-489-7600

Cage: 18731

Ingredients

STYRENE, MONOMER

CAS: 100-42-5

RTECS: WL3675000

Fraction By Weight: < 20%

OSHA PEL 100 PPM

ACGIH TLV: S,50PPM/100STEL;9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


TALC (POWDER) CONTAINING NO ASBESTOS FIBERS; (TALC)

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: < 50%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST


UNSATURATED POLYESTER RESIN

Fraction By Weight: < 50%


FIBROUS GLASS; (GLASS FIBER)

CAS: 65997-17-3

Fraction By Weight: < 10%

OSHA PEL 5 MG/M3 RDUST

ACGIH TLV: 10 MG/M3 DUST

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SKIN: PRLNGD/FREQUENT CNTCT MAY CAUSE
DEFATTING, DRYNESS WITH IRRIT & POSS DERMATITIS. STYRENE MAY BE
ABSORBED THRU THE SKIN IN TOXIC AMTS. EYES: MAY CAUSE TEARING &
IRRIT. INHAL: VAPS MAY CAUSE NOSE, THROAT & RESP TRACT IRRIT. HIGH
CONC MAY CAUSE HDCH & NAUSEA. RPTD HIGH CONC EXPOS MAY CAUSE LIVER
& (EFTS OF OVEREXP)
Explanation of Carcinogenicity:STYRENE: GROUP 2B (IARC).
Effects of Overexposure:HLTH HAZ: KIDNEY DAMAGE. INGEST: MAY CAUSE GI
DISTURBANCES, PAIN AND DISCOMFORT. CHRONIC: INHAL: REPEATED
EXPOSURE TO HIGH CONCENTRATIONS MAY CAUSE LIVER AND KIDNEY DAMAGE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH WITH WATER FOR AT
LEAST 15 MIN. GET MEDICAL ATTENTION. INHAL: REMOVE VICTIM FROM
EXPOSURE. IF VICTIM IS UNCONSCIOUS GIVE ARTIFICIAL RESP OR OXYGEN
AS NEEDED . GET MEDICAL ATTENTION. INGEST: DO NOTINDUCE VOMITING
(ASPIRATION HAZARD). GET MEDICAL ATTENTION.

Fire Fighting

Flash Point Method:CC
Flash Point:98.0F,36.7C
Lower Limits:1.1 %
Upper Limits:6.1 %
Extinguishing Media:WATER SPRAY, FOAM, DRY CHEMICAL OR CO2.
Fire Fighting Procedures:FIRE FIGHTERS EXPOSED TO VAPORS OR PRODUCTS OF
COMBUSTION SHOULD WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:AT ELEVATED TEMPERATURES SUCH AS IN A
FIRE, POLYMERIZATION MAY TAKE PLACE. IF CONTAINED, VIOLENT RUPTURE
MAY RESULT.

Accidental Release

Spill Release Procedures:REMOVE SOURCES OF IGNITION. ABSORB SPILL WITH
ABSORBENT MATERIAL SUCH AS VERMICULITE OR SAND.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID STORAGE ABOVE 100F. STORE ONLY
IN ORIGINAL CONTAINERS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:A NIOSH/MSHA APPROVED CANISTER TYPE RESPIRATOR
MUST BE WORN TO PREVENT THE INHALATION OF VAPORS OR SPRAY MISTS
WHEN THE TLV OR PEL IS EXCEEDED. WEAR A DUST MASK WHEN SANDING
CURED PRODUCT.
Ventilation:GENERAL VENTILATION IS REQUIRED DURING NORMAL USE.
Protective Gloves:PLASTIC OR CHEMICAL RESISTANT.
Eye Protection:CHEM WORK GOGG/FULL LENGTH FSHLD .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:295F(ING 1)
Vapor Pres:4.3 @ 20 C
Vapor Density:HVR/AIR
Spec Gravity:1.8
Evaporation Rate & Reference:SLOWER (BUTYL ACETATE=1)
Solubility in Water:NIL
Appearance and Odor:PASTE, SHARP AROMATIC ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT AND DIRECT SUNLIGHT.
Hazardous Decomposition Products:HEATING TO DECOMPOSITON MAY CAUSE THE
EMISSION OF IRRITATING VAPORS.

Disposal

Waste Disposal Methods:SMALL QUANTITIES CAN BE REACTED WITH THE
APPROPRIATE HARDENER TO SOLIDIFY. DISPOSE IN ACCORDANCE WITH ALL
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.